IKEA METOD kitchen doors made to measure

From 176.81 EUR/m² incl. VAT for the Flat lacquer. The other lacquers are 215.25-297.25 EUR/m² (milled, framed, vitrines), birch and pine plywood 243.44 EUR/m², natural veneers (Oak, Smoked Oak, Walnut, Muskato Burl, Silver Burl) 345.94 EUR/m². A concrete example: a 60x80 cm door in the Flat lacquer has 0.476 m², billed as 0.50 m² (we count in 0.05 m² steps and round up), which comes to 88.41 EUR. Double-sided lacquering is a surcharge of 89.69 EUR/m² (it does not apply to veneers and plywood). You can price your own set in the configurator: enter the size and the style, and the price appears straight away.

Yes. Our fronts are designed specifically for IKEA systems. Hinge drillings for 35 mm hinges follow METOD standards - unscrew the old, screw on ours. If in doubt, send a photo of the cabinet and we'll verify together.

Easiest way: measure existing fronts with a tape measure. If you have METOD cabinets, our configurator knows the standard dimensions - just pick the model. You can also send photos and we'll help determine the dimensions.

7 weeks from payment confirmation. We make each front to your dimensions - it's not a stock item. Order with a buffer before installation.

Order a sample - you'll see the material and colour in person, in your own light. Before production we confirm dimensions via email. If a front is defective or doesn't match the order - we repair, replace, or refund.

Yes. We send front samples - you'll check material and colour against your wall, in your light. Screen colours can lie, samples don't. The sample cost is deducted from the production order with code SAMPLE (orders over PLN 1000, ~ €250).

No. METOD and FAKTUM are different systems - different opening dimensions, different front dimensions. We make fronts for both systems, but you need to choose the right one. Not sure what you have? Send a photo of the hinge and we'll know right away.

Yes. We have corner doors for METOD cabinets in one-piece and two-piece versions. Check the configurator or write to us with dimensions.

Yes. We make anything that can be made from a front - side panels, fillers, trims, plinths, dishwasher panels. Any size and purpose. Send dimensions, we'll quote the whole project.

Yes - we lacquer in any colour from the RAL, NCS and Farrow & Ball palettes (included in the price), and make fluted fronts (Rytm, Linea, Pasmo), veneered fronts and handleless fronts with a milled edge.

Yes. We'll help with system, dimensions, finish, and accessories. Write to kontakt@ogony.pl or call us - we'll advise based on photos of your kitchen.

Doors: widths 20, 30, 40 and 60 cm, heights 40, 60, 80, 100, 120, 140 and 200 cm. Extended doors for wall cabinets (handleless): widths 30, 40, 45 and 60 cm, heights 42, 62, 82, 102, 122 and 142 cm. Drawer fronts: widths 40, 60 and 80 cm, heights 10, 20, 40, 60 and 80 cm. The actual size is 3 mm smaller than the nominal one, exactly as in METOD, so 60 cm means 597 mm, 40 cm means 397 mm and 120 cm means 1197 mm. In FAKTUM the deduction is 4 mm; we described the differences in our comparison of FAKTUM and METOD. The most frequently ordered sizes are 60x80 for doors and 60x20 and 60x40 for drawers. The full grid is described in our guide to METOD fronts.

BODBYN is a framed front in a warm white; our equivalent is the Shaker style (230.62 EUR/m² incl. VAT) in colour NCS S 0502-Y. RINGHULT and VEDDINGE are flat, without milling, so in shape they correspond to the Flat style at 176.81 EUR/m² incl. VAT. The finish differs, so before ordering take a sample for 23 EUR and compare it on the spot. VOXTORP is flat and handleless; here we use Flat or Milled handle (215.25 EUR/m² incl. VAT) in the cool white NCS S 0300-N. For the classic framed LERHYTTAN and HANVIKEN, Shaker or Hampton fits (230.62 EUR/m² incl. VAT). We listed the colour codes in our article on IKEA colour equivalents and NCS codes. BODBYN, RINGHULT, VEDDINGE, VOXTORP, LERHYTTAN and HANVIKEN are trademarks of Inter IKEA Systems B.V. We are not affiliated with IKEA and we make our own replacements that fit METOD carcasses.

Let us take a kitchen with 12 fronts: 4 doors 60x80, 4 extended doors 60x102 and 4 drawer fronts (2 pcs 60x20, 2 pcs 60x40). That is 5.04 m² in total, so in the Flat lacquer at 176.81 EUR/m² about 890 EUR incl. VAT. The same set in natural veneer at 345.94 EUR/m² is about 1745 EUR incl. VAT. We calculate from the actual sizes. With double-sided lacquering another 89.69 EUR/m² is added to the rate; this does not apply to veneer and plywood. You can check the amount for your own sizes in the configurator.

No, not in a standard build. The difference is 2 mm and it goes outwards, into the room, not into the cabinet opening, because the front overlays the carcass at the face. The dimensions in plan are the same as in METOD (60 cm means 597 mm), so the gaps between the fronts and the way the drawers run stay unchanged. The thicker 18 mm is visible only on the edge from the side, and only where our front sits directly next to an original IKEA one.

Yes, we drill the cup holes to the METOD standard, so you screw on your own UTRUSTA and buy nothing extra. If you are not sure whether your cabinets are METOD, check the carcass near the edge: METOD has two rows of holes, FAKTUM a single one.

Yes, we drill drawer fronts to the METOD standard, so they fit both MAXIMERA and FORVARA. The available widths are 40, 60 and 80 cm, the heights 10, 20, 40, 60 and 80 cm. The most frequently ordered are 60x20 and 60x40, which in actual size means 597x197 mm and 597x397 mm. We also make a dishwasher front without drillings and a front for a pull-out larder unit.

Yes, you order from a single piece. In the configurator you pick the size and the style and set the quantity yourself, so you can add two doors instead of a whole kitchen. When you are adding to existing fronts, order a sample for 23 EUR first and compare the colour on the spot, because white on a screen and white on a cabinet are two different things. The lead time is the same as for a whole kitchen, 7 weeks.