IKEA FAKTUM fronts: made-to-measure replacements

Fronts for FAKTUM start at 243.86 EUR/m² incl. VAT in the Smooth style. In practice a 60x70 cm door, which in actual size is 596x695 mm, has 0.4142 m², billed as 0.45 m² (we count in 0.05 m² steps and round up), so 109.74 EUR per piece. Styles such as Shaker, Linea or Grip cost 312.72 EUR/m² incl. VAT, and oak veneer 416.00 EUR/m² and walnut veneer 456.17 EUR/m² incl. VAT. You enter the size in the configurator and see the price straight away, with no enquiry to send and no waiting for a quote.

Yes. Our fronts are designed specifically for IKEA systems. Hinge drillings for 35 mm hinges follow FAKTUM standards - unscrew the old, screw on ours. If in doubt, send a photo of the cabinet and we'll verify together.

Easiest way: measure existing fronts with a tape measure. If you have FAKTUM cabinets, our configurator knows the standard dimensions - just pick the model. You can also send photos and we'll help determine the dimensions.

9 weeks from payment, delivery included. We make each front to your dimensions - it's not a stock item. Order with a buffer before installation.

Order a sample - you'll see the material and colour in person, in your own light. Before production we confirm dimensions via email. If a front is defective or doesn't match the order - we repair, replace, or refund.

Yes. We send front samples - you'll check material and colour against your wall, in your light. Screen colours can lie, samples don't. The sample cost is deducted from the production order with code SAMPLE (orders over PLN 1000, ~ €250).

Yes, that's our specialty. IKEA discontinued FAKTUM in 2014, but the cabinets still serve. We make fronts exactly to FAKTUM dimensions - you don't have to throw out the whole kitchen.

No. We drill for standard 35 mm cup hinges - the same as IKEA originals. Your hinges should work. If they're worn, we recommend replacing them during the swap.

FAKTUM was sold until 2014. Easiest way: look inside the cabinet - there should be a sticker with the system name on the side panel. You can also send a photo of the hinge and we'll recognize it right away.

Yes. We make anything that can be made from a front - side panels, fillers, trims, plinths, dishwasher panels. Any size and purpose. Send dimensions, we'll quote the whole project.

Yes. We'll help with system, dimensions, finish, and accessories. Write to kontakt@ogony.pl or call us - we'll advise based on photos of your kitchen.

IKEA discontinued FAKTUM in 2014 and no longer makes these fronts, so the only route is a made-to-measure replacement. That is exactly what we do: fronts for old FAKTUM carcasses, in the original size grid and with drillings for your own hinges, so you replace the front alone and the cabinets stay in place. You pick the sizes from the ready FAKTUM presets in the configurator, and prices start at 243.86 EUR/m² incl. VAT. You order as many fronts as you need, you do not have to do the whole kitchen at once.

FAKTUM doors came in widths 15, 20, 30, 40, 45, 50 and 60 cm and heights 35, 57, 70, 92 and 125 cm, and drawer fronts in widths 30, 40, 45, 50, 60 and 80 cm with heights 9, 13, 18, 25, 31, 57 and 70 cm. The actual width is the nominal one minus 4 mm, so 60 cm means 596 mm, while heights have their own sizes: 70 cm means 695 mm and 92 cm means 918 mm. In METOD you subtract 3 mm, not 4, and that is one of the reasons why METOD fronts do not fit FAKTUM carcasses. The heights 70 and 92 cm and the width 50 cm are typical for FAKTUM only, METOD does not have them, and 45 cm appears in METOD only in the extended doors for wall cabinets. Before you order a replacement, check how to measure FAKTUM fronts.

LIDINGÖ and STÅT are framed fronts; our equivalents are Vienna and Hampton (both 344.28 EUR/m² incl. VAT). ABSTRAKT is a flat front, without milling, in high gloss, so the Smooth style replaces it (243.86 EUR/m² incl. VAT, high gloss +15%) in the colour and gloss level you choose. ÄDEL is a frame door with a recessed flat panel, so Shaker in lacquer replaces it, and the birch version can also be replaced by an oak-veneered frame door (a different wood species, quoted individually). If you do not know which series you have, send a photo of the front and the hinge and we will identify it. You will find more comparisons in our text on FAKTUM fronts. FAKTUM, LIDINGÖ, STÅT, ABSTRAKT and ÄDEL are trademarks of Inter IKEA Systems B.V. We are not affiliated with IKEA and we make our own replacements.

Let us take a kitchen with 18 fronts: 8 doors 60x70 cm, 4 wall cabinet doors 60x92 cm and 6 drawer fronts 60x13 cm. Converted to the actual sizes that is 5.95 m². In the cheapest Smooth style (243.86 EUR/m² incl. VAT) such a set costs about 1450 EUR, in the styles at 312.72 EUR/m² incl. VAT (Shaker, Linea, Grip) about 1860 EUR, and in oak veneer at 416.00 EUR/m² incl. VAT about 2480 EUR. The carcasses, hinges and runners stay yours, you pay for the fronts only.

Yes. The original IKEA fronts are 16 mm and ours are 18 mm, but the installation is identical, because the thickness changes neither the front size nor the spacing of the hinge drillings. The front projects 2 mm further from the face of the carcass and that is the only visible difference, the gaps between the fronts stay the same. An 18 mm board is stiffer, which matters with tall doors of 92 and 125 cm. If you want to see the material and the colour before ordering a whole kitchen, take a front sample for 23 EUR.

The most common series: LIDINGÖ, STÅT, ABSTRAKT, ÄDEL, APPLÅD, NEXUS, RAMSJÖ, TIDAHOLM, HÄRLIG, SOFIELUND and LILJESTAD; for RUBRIK in glass, steel and copper we have no equivalent. We do not copy IKEA designs; we match our style with a similar character (framed, flat, veneer) in FAKTUM dimensions. The table of equivalents is higher up on this page.

Yes, to 17 EU countries including Germany, Austria, Czechia and Italy. A euro pallet costs from €115 and an oversized pallet (any front over 120 cm) from €149, depending on the country. All prices on ogony.eu are in euros.